cookieBanner.title
cookieBanner.description
cookieBanner.description
For the best bass reproduction and high dynamic pressure, it is equipped with two high-excursion drivers that deliver accurate, punchy and powerful bass. With the Steinway Lyngdorf Integrated System Approach and powered by the A1 or A2 digital amplifiers, the BWS-210 perfectly complements any Steinway & Sons in-wall, on-wall, or floorstanding loudspeaker. It is designed to be installed in-wall and comes with a paintable, magnetically held grill to cover the woofer front.
The BWS-210 utilizes a patented high-excursion shallow woofer design, customized for Steinway Lyngdorf and based on an innovative voice-coil/cone geometry and suspension which allows the highest excursion from the most space-saving construction. A four-layer voice coil, an ultra-rigid dual aluminium cone, a very powerful neodymium magnet, and an extremely rigid cast aluminium basket provide impressive bass performance, matching the renowned sound quality of Steinway & Sons speakers.
Combining digital amplification technology with digital processing in Steinway & Sons stereo and surround sound processors and patented Steinway Link technology ensures a high-resolution, energy-efficient and lossless transmission path for the purest possible sound
OTHER CORE BRAND TECHNOLOGIESAn unusually shallow and patented woofer design with a customized four-layer voice coil, powerful neodymium magnet, and stiff dual aluminium cone to allow a space-saving yet high excursion construction.
The BWS-210 is specifically made for custom installations which require the most shallow woofer solution, perfectly fitting 6 inch/15 cm cavity walls.
The very rigid and sealed enclosure is made from high-quality MDF with internal bracing to avoid unwanted resonance and vibration.
Description:
Passive in-wall woofer
Power Handling:
300 W (IEC long term)
Frequency range:
30 – 200 Hz
Sensitivity:
88 dB (2.83 V / 1 m)
Maximum SPL:
115 dB @ 1 m (IEC long term)
Woofer:
2 x 10", dual aluminum cone, 4-layer voice coil, neodymium magnet
Amplification needed:
1 channel / A1 or A2 amplifiers, 1 x 400 watt
Nominal impedance:
4 Ohm
Inputs:
Screw type (for bare wire)
Enclosure:
MDF with internal bracing, 19 mm and 16 mm
Placement:
In-wall floor-standing
Dimensions (W x H x D):
350 x 1000 x 133 mm
Weight:
21 kg
productPage.contactUsForBuying
Gramophone Editorial
Perfection can never be achieved by mixing products from different manufacturers off the shelf.
The strength of the chain is determined by its weakest element, and only a proprietary system approach ensures high performance in every area. An integrated system approach from Steinway Lyngdorf is the key to solutions for every room and every need.
commonSections.infoCards.compatibility
